Eshooter KESTREL V2 - Bluetooth Mosfet For Gel Blaster V2 Gearbox

The Eshooter Kestrel Mosfet is a Bluetooth-enabled electronic upgrade for Gel Blaster V2 gearboxes. It provides programmable features, improved efficiency, and greater control over your blaster’s performance.

To ensure proper installation and maintain warranty coverage, we strongly recommend having the MOSFET installed by our qualified technicians. Any damage resulting from unauthorized installation will void the warranty.

Key Features of the Eshooter Kestrel Bluetooth Mosfet/ ETU System

•Pre-Cocking Adjustment

Fine-tune pre-cocking mode with 100 levels of precision, ensuring optimal performance in all firing modes and improving trigger response.

•Brushless Motor Support

Fully compatible with high-speed, high-torque, and brushless motors for enhanced power and reliability.

•Trigger Sensitivity Adjustment

Five sensors detect trigger movement, allowing precise adjustments without disassembly. Customize sensitivity easily via the wireless Eshooter App.

•Selector Modes

Customize firing modes, including SAFE, SEMI, BINARY, Burst, AUG, AUTO, and Sniper, for a tailored shooting experience that suits your tactical needs.

•Magazine Shot Counter

Simulate realistic magazine functionality with adjustable round counts from 30 to 100, adding immersion to your gameplay.

•Personalized Settings

Save up to 5 custom settings and rename your device for a truly personalized experience. Switch profiles effortlessly via the app.

•ROF Control (Rate of Fire)

Adjust the rate of fire to your preference, even when using high-voltage batteries, for consistent and controlled performance.

•Sensor Calibration

Built-in calibration ensures precise alignment with your gearbox for optimal performance and accuracy.

•Battery Protection

Prevents over-discharge of LiPo/LiFe batteries by monitoring voltage levels. The app provides low-battery warnings to ensure your equipment stays powered.

•Active Brake

Prevents double shots by ensuring the piston stops in the forward position, extending the life of internal components and improving reliability.

•Cycle Detection

Detects gear cycle completion with a rack sensor. Supports DSG, HSG, and standard gear configurations for versatility.

•Firmware Updates

Keep your system up to date with free OTA (Over-The-Air) updates via the Eshooter App.

•Smart Fuse Protection

Built-in intelligent fuse system protects the motor, battery, and controller from overheating, overloading, and short circuits.

•Sleep Mode

Automatically enters sleep mode after one hour of inactivity to conserve battery power. Simply reconnect the battery to reactivate. Perfect for long MILSIM games.

•Advanced MOSFET

Directly channels battery power to the motor, boosting rate of fire (ROF) and trigger response for an edge in every skirmish.

•Locked Rotor Protection

Safeguards your gearbox from damage when gears or motors encounter issues.

•Sniper Delay Mode

Adds realistic shot delays of 0.5s, 1s, 2s, or 3s for precision shooting and a more immersive experience.

To ensure proper installation and maintain warranty coverage, we strongly recommend having the MOSFET installed by our qualified technicians. Any damage resulting from unauthorized installation will void the warranty.

General Safety

Keep blasters, gel balls, gas, batteries, chargers, magazines, parts and tools away from children and unauthorised users.

Gel Ball Safety

Gel balls are not edible and must never be eaten or swallowed. Keep both dry and hydrated gel balls away from children and animals. Seek immediate medical advice if swallowed.

Clean up spilled gel balls immediately, as they may create a slipping hazard. Do not place gel balls in the ears, nose or other body openings.

Store gel balls in a sealed container away from heat and direct sunlight. Dispose of them responsibly and do not release large quantities into drains or the environment.

Gas Safety

Gel blaster gas is flammable and stored under pressure. Keep it away from flames, sparks, hot surfaces and direct sunlight. Do not smoke while handling or filling gas.

Use gas only in a well-ventilated area. Do not inhale the gas, puncture or burn the container, or leave it inside a hot vehicle.

Avoid contact with escaping liquid gas, as it may cause cold burns. Never aim a gas container or magazine valve towards your face or another person.

Battery Safety

Do not crush, puncture, modify, short-circuit or expose batteries to water, fire or excessive heat.

Never use a battery that is swollen, leaking, damaged, unusually hot or producing an unusual smell.

Store batteries in a cool, dry place away from direct sunlight and flammable materials. Protect battery terminals from contact with metal objects.

Charger Safety

Only charge batteries with a compatible charger designed for the correct battery type and cell count.

Never charge a battery unattended or overnight. Charge it on a stable, non-flammable surface in a cool, dry and ventilated area.

Stop charging immediately if the battery becomes swollen, damaged, unusually hot or produces an unusual smell.

Magazine Safety

Keep magazines pointed away from your face and other people while loading, filling or releasing pressure.

Keep gas magazines away from fire, heat and direct sunlight. Do not puncture, crush or deliberately heat a gas magazine.

Do not look directly into the feed opening, gas valve or outlet. Keep fingers away from moving feed mechanisms and valves.

Parts and Accessories Safety

Ensure the gel blaster is unloaded and all batteries, magazines and gas sources are removed before installing, removing or adjusting parts.

Wear suitable eye protection when handling springs, pressurised components or parts that may move unexpectedly.

Shipping

We currently accept and ship orders within Queensland only.

• Free standard shipping on orders over $100
• Standard shipping: $14.95 for orders under $100
• Express shipping: $18.95
• Click & Collect orders are generally ready within 24 hours. Please wait for your pickup confirmation before visiting the store.

7-Day Change-of-Mind Returns

Change-of-mind returns are accepted within 7 days of receiving your order.

Returned products must be unused, undamaged and in their original packaging, with all accessories and components included. Products must remain in resalable condition. Items showing signs of use, damage or incomplete packaging may not be accepted.

Shipping fees are non-refundable for change-of-mind returns, and customers are responsible for return shipping costs.

30-Day Product Warranty

Products include a 30-day warranty covering manufacturing defects and faults under normal use.

The warranty does not cover damage caused by misuse, improper handling, unauthorized modifications, incorrect installation, accidental damage, normal wear and tear, or failure to follow product instructions.

This policy does not limit any rights or remedies available under the Australian Consumer Law.