⚠️ We only accept orders within Queensland.

Free Standard Shipping on orders $100!

Gel Blaster Muzzle Devices

Shop gel blaster muzzle devices, including non-functional mock suppressors, flash hiders and Eshooter tracer units. Tracer units can add glow-gel, muzzle-flash and model-specific electronic effects. Match the barrel thread, QD profile, adaptor and clearance, or visit our QLD physical shop in Coomera for fitment help.
EOTECH 558 Holographic Gel Blaster Red Dot Sight

Red Dot Sights

Mini RMR red dot sight for gel blaster pistols

Gel Blaster Pistol Sights

Rifle scope with safe padding for circular thumbnail

Rifle Scopes

Gel Blaster Magnifiers collection image

Gel Blaster Magnifiers

Gel Blaster Flashlights collection image

Gel Blaster Flashlights

Gel Blaster Lasers collection image

Gel Blaster Lasers

Gel Blaster Rifle Suppressors collection image

Gel Blaster Suppressor

Gel Blaster Foregrips collection image

Gel Blaster Foregrips

Compare (0/5)

20 products

KAC QDC / MCQ-PRT Dummy Gel Blaster Mock Suppressor - BLK

KAC QDC / MCQ-PRT Dummy Gel Blaster Mock Suppressor - BLK

From $150.00
Dead Air Sandman-K Gel Blaster Mock Suppressor - BLK

Dead Air Sandman-K Gel Blaster Mock Suppressor - BLK

From $119.00
KAC QDC / MCQ-PRT Dummy Gel Blaster Mock Suppressor - FDE

KAC QDC / MCQ-PRT Dummy Gel Blaster Mock Suppressor - FDE

From $150.00
Eshooter Flare Smoky BT: Gel Blaster Tracer Unit

Eshooter Flare Smoky BT: Gel Blaster Tracer Unit

$180.00
Eshooter Flare Cube BT PISTOL Gel Blaster Tracer Unit

Eshooter Flare Cube BT PISTOL Gel Blaster Tracer Unit

$180.00
SLX MG 6.8mm Gel Blaster Mock Suppressor

SLX MG 6.8mm Gel Blaster Mock Suppressor

$239.00
SRD556 Style Mock Gel Blaster Mock Suppressor for 14mm CCW

SRD556 Style Mock Gel Blaster Mock Suppressor for 14mm CCW

$119.00
Eshooter Essential Oil for Flare Smoky Tracer Unit

Eshooter Essential Oil for Flare Smoky Tracer Unit

$15.00
E&C 14mm Negative 4-Prong Gel Blaster Flash Hider - Fits Dead Air Sandman Suppressor

E&C 14mm Negative 4-Prong Gel Blaster Flash Hider - Fits Dead Air Sandman Suppressor

$27.00
Dead Air Sandman-K Gel Blaster Mock Suppressor

Dead Air Sandman-K Gel Blaster Mock Suppressor

$119.00
Gel Blaster Mock KAC QDC Suppressor

Gel Blaster Mock KAC QDC Suppressor

$129.00
E&C 14mm Negative Dimpled 3-Prong Gel Blaster Flash Hider

E&C 14mm Negative Dimpled 3-Prong Gel Blaster Flash Hider

$29.00
Eshooter Flare Tracer Alu-Alloy CASE

Eshooter Flare Tracer Alu-Alloy CASE

$68.00
Eshooter Flare Tracer Carbon Fiber CASE

Eshooter Flare Tracer Carbon Fiber CASE

$44.00
Eshooter Flare Mono: Gel Blaster Tracer/Flame Unit

Eshooter Flare Mono: Gel Blaster Tracer/Flame Unit

$89.00
Eshooter Flare M: Gel Blaster Tracer/Flame Unit

Eshooter Flare M: Gel Blaster Tracer/Flame Unit

$105.00
Eshooter Flare M BT: Gel Blaster Tracer Unit

Eshooter Flare M BT: Gel Blaster Tracer Unit

$129.00
Gel Blaster Mock AAC QD Suppressor

Gel Blaster Mock AAC QD Suppressor

$119.00
E&C M110 QD Gel Blaster Mock Suppressor Black

E&C M110 QD Gel Blaster Mock Suppressor Black

$149.00
E&C M110 QD Gel Blaster Mock Suppressor Tan

E&C M110 QD Gel Blaster Mock Suppressor Tan

$149.00
Muzzle device guide

Choosing a gel blaster muzzle device

A gel blaster muzzle device is an attachment fitted at the end of the outer barrel. The main types here are non-functional mock suppressors, flash hiders and electronic tracer units. Each has a different purpose and may use a different fitting system.

Choose the type first

Mock suppressors

These are non-functional cosmetic housings for gel blasters. They do not reduce sound. Choose one by its direct thread or matching QD mount, then check its length, weight and handguard clearance.

Flash hiders

The current flash hiders are external replica parts. Some also act as the matching mount for a specific QD mock suppressor, so the locking profile matters as much as the barrel thread.

Tracer units

Electronic tracer units can illuminate compatible glow gels or add a simulated muzzle-flash effect. Selected Eshooter models also add app, chronograph or smoke functions.

How the fitting systems differ

Do not choose by appearance alone. Start with the barrel or muzzle interface, then allow enough room around the outer barrel and handguard.

Direct thread

The device screws onto a compatible outer-barrel thread. Several products use 14 mm CCW, but that is not a guarantee that every device will fit every gel blaster.

Quick-detach (QD)

A QD mock suppressor locks onto a matching flash hider or muzzle mount. QD profiles are not universal, even when the mount itself attaches to a 14 mm CCW barrel.

Adaptors and clearance

Some tracer units use an adaptor for a different thread. The outside diameter also needs enough clearance if the muzzle sits inside or close to the handguard.

QD pairing: some QD models use a separate matching flash hider or muzzle mount. When a compatible mount is listed on the product page, use that pairing. If no mount is listed, contact us with the exact model before ordering.

Tracer effects and support products

Glow tracer gels and muzzle flash

Use compatible glow tracer gels if you want the gel itself to remain visible in flight. A simulated muzzle-flash mode can still create a visible burst with standard gels.

Cases and Smoky refill oil

The Eshooter aluminium and carbon-fibre cases are housings for compatible Flare tracer cores, not complete tracer units. Flare Smoky refill oil is also a support product for the Smoky system.

QLD physical shop, local stock and fitment help

Send us the gel blaster model and clear photos of the muzzle, thread or current flash hider, or bring the setup to our Coomera shop. We can check the thread, adaptor, QD profile and available clearance before you order.

Browse mock suppressors Browse flash hiders Browse tracer units All attachments Cyber Custom workshop

Gel blaster muzzle device questions

What is a gel blaster muzzle device?

A gel blaster muzzle device is an attachment fitted at the end of the outer barrel. This collection includes non-functional mock suppressors, flash hiders and electronic tracer units, plus selected tracer cases and refill oil.

What is the difference between a mock suppressor, flash hider and tracer unit?

A mock suppressor is a non-functional cosmetic housing and does not reduce sound. The current flash hiders are external replica parts, and some also provide the matching mount for a specific QD mock suppressor. A tracer unit uses electronics to add effects such as glow-gel illumination or simulated muzzle flash.

Will a 14 mm CCW muzzle device fit every gel blaster?

No. Some products use a 14 mm CCW direct thread, but fit can also depend on an adaptor, the available clearance and the exact QD locking profile. Check the product page and the gel blaster's muzzle interface before ordering.

What does QD mean on a gel blaster muzzle device?

QD means quick-detach. A QD mock suppressor locks onto a matching flash hider or muzzle mount instead of screwing directly onto the outer barrel. QD profiles are not universal, even when the mount itself uses a 14 mm CCW barrel thread.

Do I need to buy a flash hider for a QD mock suppressor?

It depends on the product. Some QD models use a separate matching flash hider or muzzle mount. When a compatible mount is listed on the product page, use that pairing. If no mount is listed, contact us with the exact model before ordering.

Do tracer units need glow gel balls?

Use compatible glow tracer gels if you want the gel itself to remain visible after leaving the barrel. A tracer unit's simulated muzzle-flash mode can still create a visible burst with standard gels, but ordinary gels will not produce the same illuminated flight path.

Are tracer cases and refill oil complete tracer units?

No. The aluminium and carbon-fibre case products are replacement or protective housings for compatible Eshooter Flare cores. Flare Smoky oil is a consumable for the Smoky system. Neither is a complete functioning tracer unit unless the individual product page says otherwise.

Can CyberTrigger check whether a muzzle device will fit?

Yes. Send us the gel blaster model and clear photos of the muzzle, thread or current flash hider, or bring the setup to our QLD physical shop in Coomera. We can check the thread, adaptor, QD profile and available clearance before you order.